• electronics, electrical appliances
  • transportation
  • home decoration
  • furniture, flooring materials, etc
  • Paper, jewelry, printing and packaging industries
  • Industrial small packaging
  • Other industries

Product   

Name

Characteristics   and Application

Color

Viscosity,   cps

Solid

content

Weight   

ratio

Environmental

standard

GU805

A two-component polyurethane electronic pouring   adhesive. It has good adhesion strength to various substrates such as PVC and   inorganic substrates.

Biege

1.2 ± 4,000

≥99%

A:B=4:1

RoHS\

REACH

EP199

A room temperature   cured epoxy pouring adhesive. Due to its characteristics of simple   preparation, high bonding strength, good heat resistance, good electrical   insulation, good air tightness, good resistance to cold and heat shock, it is   widely used for pouring electronic components with high air tightness and   high temperature resistance.

Black

2,000~8,000 after   A and B

mixing

100%

A:B=4:1

RoHS\

REACH

EP198

A two-component   normal temperature or heat cured epoxy pouring adhesive. Due to its   characteristics of simple preparation, high bonding strength, excellent heat   resistance, good electrical insulation, good air tightness, good resistance   to cold and heat shock, it is widely used for pouring electronic components   with high air tightness and high temperature resistance (above 250).

Black

3,000~9,000 after   A and B

mixing

100%

A:B=6:1

RoHS\

REACH

Product   Name

Characteristics   and Application

Color

Viscosity,   cps

Solid   content

Weight   ratio

Environmental   standard

EP118

A   two-component thermal conductive epoxy electronic pouring sealant which cures   at room temperature. It has long pot life, mild temperature impact, small   shrinkage, good operability, permeability and wettability. After cured, it   has good surface gloss, few bubbles, high adhesion and mechanical strength.   It can bond PBT, PVC, etc. It has good resistance to cold and heat shock, and   good electrical performance. It is suitable for sealing of electronic   components with the above requirements.

Black

A:20,000~40,000

B:5-100

100%

A:B=10:1

RoHS\

REACH

EP146

A   two-component epoxy electronicpouring   sealant which cures at room temperature or at medium temperature. It has long   pot life, mild temperature impact, small shrinkage, good operability,   permeability, and wettability. After cured, it has good surface gloss, few   bubbles, high bonding strength and mechanical strength. It can bond PVC. It   has good resistance to cold and heat shock, good electrical performance, and   good resistance to boiling.It   is suitable for sealing of electronic components with the above requirements.

Black

A:9,000~13,000

B:5-100

100%

A:B=4:1

RoHS\

REACH

Product   Name

Characteristics   and Application

Separation

Condition

Viscosity,   cps

Solid   content

Applicability   to

Product   Features

BA516

A single-component   low-temperaturedebondtype handling adhesive. It is suitable   for bonding and separation between thin glass and thick glass substrates. Always   applied by slot die coater. It has high transparency,goodheatresistance, and enough strength to fix   the plastics substrate in general manufacturing processes. It is easily peeled   off at lowtemperatures,   without residual adhesive. It has high UV penetration rate, and neveraffects the subsequent curing of the   frame adhesive.

Low temperature

150~600

25-35%

Temporary bonding between plastics and glass

Good heat resistance, strong adhesion, ease to peel off   at low temperatures, and no residual adhesive after peeling

BA513

A single-component low-temperaturedebondtype handling adhesive. It   is suitable for bonding and separation between substrates with significant   CTE differences.Always applied by slot die   coater. It has high transparency,goodheatresistance, and enough   strength to fix the plastics substrate in general manufacturing processes. It   is easily peeled off at lowtemperatures, without   residual adhesive. It has high UV penetration rate, and neveraffects the subsequent curing of the frame adhesive.

Low temperature

150~600

25-35%

Temporary connection between thin glass and thick glass   substrate

Good heat resistance, strong adhesion, ease to peel off   at low temperatures, and no residual adhesive after peeling

BU220

A single-component UVbondedhandling adhesive. It is suitable fortemporary bonding betweentransparent plastics substratesand vehicle substrates.Always applied by slot die coater. It has high   transparency, good heat resistance, and enough strength to fix the plastics   substrate in general manufacturing processes. After UV cured, it is easily peeled   off, without residual adhesive.

UV

200~1800

25-35%

Temporary connection betweentransparent plastics substrateand vehicle substrate

Good heat resistance, strong adhesion, ease to peel   after UV curing, and no residual adhesive after peeling

Product   Name

Characteristics   and Application

Color

Viscosity,   cps

Curing   condition

Applicability   to

UV710S

A single-component   UV + heat curedLCD frame adhesive forscreenprinting process. It has good defoaming   and leveling properties.Afterscreen printing and bonding, it always generates nobubbles,hasstrong adhesion toplastics substrates,goodelectrical properties, flexibility, and   low ion content, and never affects the characteristics of liquid crystals.

Slightly yellow   translucent paste

30,000~80,000

UV+ heat

Dual-curable frame adhesive for plastics   substrate in screen printing process

UV710F

A one-component   UV+ heat cured LCD frame adhesiveused in the ODFprocess. It hasstrong adhesionto the substrate,good flexibility, low ion content, and never   contaminates liquid crystalbefore and aftercured.

Slightly yellow   translucent paste

120,000~200,000

UV + heat

Dual-curable   frame adhesive forplasticssubstrate in ODFprocess

UV770F

It is one-component   UV cured EWD frame adhesiveused in the ODFprocess. It has simple curing method, fast curing rate,good sag resistance, strong adhesion toplastics substrates,goodelectrical properties,good flexibility, low ion content, and   incompatibility with waterbefore and aftercured.

Slightly yellow translucent paste

100,000~200,000

UV

Water-cured   frame adhesive


Product

Name

Characteristics and Application

Color

Viscosity,

cps

Solid

content

Softening point

GA368

Automotive decoration (bonding of roofs)

Light yellow

250~350

≥20%

≥130

GA633

Automotive interiors (bonding of side door   panels).

Light yellow

250~350

≥20%

≥110

Product

Name

Characteristics and Application

Color

Viscosity,

cps

Solid

content

Peeling strength

GA623

It is mainly used to bond porous   interfaces such as sponges or bond porous interfaces with other materials. It   has high solid content, good spraying performance, low permeability to the substrate,   good adhesion to the substrate, and low consumption.

Light yellow viscous fluid

100~250

≥30%

≥50

Product

Name

Characteristics and Application

Color

Viscosity, cps

Solid

content

Weight ratio

Initial curing

time

Curing conditions

EP912

A two-component solvent-free   environmentally acceptable floor adhesive. Ithas such advantages as handling   convenience, long application time, curing at room temperature,nofoaming, no sagging, and storage   stability.After   cured, it has goodresistance   to impact and water, and high adhesion to various substrates. It can be   widely used to bond wood, metal, concrete, rubber, PVC, ceramics, etc.

A: Yellow viscous fluid

B: Yellow semi transparent viscous fluid

A:5,000~15,000

B:200~1,000

100%

A:B=3:1

8 hr (10 g)

Room temperature

Product

Name

Characteristics and Application

Color

Viscosity, cps

Solid content

weight

mixture ratio

Initial

Curing

time

Curing

condition

Shear

strengthMPa

Hardness

Shore D

GU302

An   adhesive used for civil construction. It can bond rubber floor, wood, gypsum   board, steel plate, PU foam material, rock wool board, and PVC board very   well.

Light yellow viscous fluid

10,000

≥99%

A:B=4:1

120 min

(10 g)

Room

temperature

8

45


Product

Name

Characteristics and Application

Color

Viscosity,

cps

Solid

content

Weight

ratio

Initial

curing

time

Curing

condition

EP100

Two-component room temperaturecured high-temperaturerepair adhesive. Due to its characteristics of simple preparation,   high temperature resistance, good impact resistance, good wettability, and   high bonding strength. It has good bonding effect on materials such as wood,   carbon fiber cloth, and metal. It can achieve room temperature curing and   heat resistanceabove100.

A: Milky white viscous fluid

B: Yellow semi transparent viscous   fluid

A:8,000~20,000

B:100~500

100%

A:B=

3:1

8hours(10 g)

Atmospheric temperature

EP918

Room temperature or medium temperature   cured epoxy adhesive. Due to its characteristics of simple preparation, high   bonding strength, and good impact resistance.Especially, it can match the color of wood according to customer   needs, overcoming the common blackening phenomenonaftersolid wood   lamination and painting. It is specifically used for laminating and bondingvarious solidwood on yachts, and can also be used for strong bonding of materials   such as metal, glass, ceramics, stone, hard plastic, FRP, wood, etc.

A:Viscous fluid, color determined by customers

B:Yellowish brown transparent viscous fluid

A:10,000~40,000

B:20,000~65,000

100%

A:B=

1:1

50minutes(10 g)

Room temperature or medium temperature   

Product Name

Characteristics and Application

Color

Viscosity, cps

Solid content

softening point

GA108

It   can bond rubber, plastics, wood, leather, paper cloth, glass, board,   fireproof board, cement, metal, aluminum plastic composite panel, etc. very   well, but soft PVC, PE, and PP silicone rubber very poorly.

Light yellow brown transparent viscous   fluid

5,400~7,000

≥24%

>66

LT128

It   can bond metal, rubber, plastics, wood, leather, paper cloth, plywood, fireproof   board, aluminium plastics composite panel, cement, etc. very well, but soft   PVC, PE, and PP silicone rubber very poorly.

Light yellow brown transparent viscous   fluid

2,000~4500

≥20.5%

>70

GA118

It can bond metal, rubber, plastics, wood, leather,   paper cloth, plywood, fireproof board, aluminium plastics composite panel,   cement, etc.

Light yellow brown transparent viscous   fluid

2400~3,000

≥22%

≥70

Product Name

Characteristics and Application

Color

Viscosity, cps

Curing conditions

MS405

A one-component   neutral modified silicone. It can be cured   by its reactionwithwater in air.It has excellent performance and can bond most materials without any   primer. It has excellent resistance to weather, UV,heatand cold, and excellent adhesiontovarious building materials. Anenvironmentally acceptable adhesivewith very low VOC.

White

Pasty

Water

Product Name

Characteristics and Application

Color

Viscosity, cps

Solid content

GA550

A   solvent cement mainly containing synthetic rubber which can bond metals,   wood, leather, MDR board, paper, cloth, rubber, plastics, cement, etc.

Light yellow viscous fluid

200~400

≥19%

GA620

It   is suitable for bonding porous surfaces such as cloth, sponge, etc. It has   low viscosity, high solid content, good spray resistance, low permeability to   substrates, and good adhesion to various substrates.

Light yellow viscous fluid

80±20

≥30%

CE125

A   polyvinyl acetate polymer. It can bonf wood, veneer, paper, cloth, bamboo,   etc.

White thick latex

18,000~23,000

≥18%

CE135

A   polyvinyl acetate polymer. It can bond wood, veneer, paper, cloth, bamboo,   etc.

White thick latex

120,000~180,000

≥35%

CE105

A   polyvinyl acetate polymer. It can bond wood, plywood, paper, cloth, leather,   bamboo, etc.

White thick latex

15,000~40,000

≥36%

CE145

A   polyvinyl acetate polymer. It is used as one-component high-strength adhesive   for civil construction.

White thick latex

8,000~15,000

≥40%

Product Name

Characteristics and Application

Color

Viscosity, cps

Solid content

CA381

A one-component tile adhesive prepared by special modified polymer   emulsion. It is easily used. It can effectively improve the bonding strength   between polished tiles and bonding mortar, and solve the common problems of   hollowing and peeling in polished tiles. It has excellent water resistance, and   is extremely suitable for dense stone and ceramic tiles with low water   absorption.

Milky white

2,000±500

50%±1

CA388

A transparent waterproof adhesive for exterior walls. It is made by a   special polymerization process. Its coating has excellent waterwhite resistance, wet adhesion, transparency, inability   to affect the original effect of the building, non-stickiness, and flexibility.   Due to high-quality raw materials, the coating has excellent aging resistance   and weather resistance, and good workability. It has good coverage on tile   surfaces and joints and never shrinks. After cured, the coating forms a   transparent elastic waterproof protective film, which is an ideal protective   waterproof material for various types of building surfaces.

White transparent

3,000±1,000

40%±1

CA375

It has strong permeability, good sealing effect, high bonding strength,   non-toxicity, no odor, safety and environmentally acceptability. It is suitable   for application ofputty to concrete, brick walls, and cement mortar or interface   treatment beforeplastering and roughening   ofsmooth walls. It can   effectively prevent hollowing, cracking, and powdering of the wall leveling   layer, and improve the bonding strength between putty or mortar and the wall.

Milky white

1500±500

12-15%

CA512

A polyacrylate emulsion used for prevention of water and leak.

Light blue lotion

50~250

≥48%

CA560

An elastic emulsion suitable for caulking of indoor or outdoor building   materials that do not directly contact with water. It has paint resistance,   safety and Environmental standard, beautifies edges and seams and prevents cracks.

White, light gray

Paste, >500,000

70%


Product

Name

Characteristics and Application

Color

Viscosity,

cps

Solid

content

Weight

ratio

Initial

Curing

time

Curing

condition

Shear

strength,

MPa

Hardness

Shore D

GU302

An adhesive used for civil construction. It can bond   rubber floor, wood, gypsum board, steel plate, PU foam material, rock wool   board, and PVC board very well.

Light yellow viscous fluid

10,000

≥99%

A:B=

4:1

120 min

(10 g)

Two components mixed and cured at room temperature

8

45

GU803

Adhesive used for civil construction. It is suitable   for flooring in gymnasium, schools, homes, etc. It can bond various   substrates such as PVC and rubber flooring very well.

Light yellow viscous fluid

600,000

≥99%

A:B=

5:1

90 min

(10 g)

Two components mixed and cured at room temperature

≥ 1 (cement)

70

GU802

An adhesive used   in civil construction. It bonds various substrates such as PVC, rubber, wood,   epoxy flooring, metal, and cement very well.

Light yellow viscous   fluid

500,000

≥99%

A:B=

5:1

90 min

(10 g)

Two components mixed and cured at room temperature

≥10

70

GU515H

An adhesive used   in buildings. It has high strength and good elasticity. It can be used to   bond metal, plastics, rubber, fiber, wood, glass, sponge foam, ceramics, etc.

Light yellow viscous   fluid

50,000

≥99%

Single-component

150 min

(10 g)

25

RH=50%

≥8

65

Product

Name

Characteristics and Application

Color

Viscosity,

cps

Surface skinning time

Curing condition

Shear strengthMPa

Hardness, Shore D

MS450

An elastic adhesive for flooring. It is specially   designed for bonding of various flooring surfaces such as cement, tile,   marble, quartz tiles, and wooden floor to provide excellent adhesion,   elasticity, noise resistance, moisture resistance, and ability to match with   indoor colors. It contains no formaldehyde or VOC. An environmentally   acceptable elastic adhesive for indoor decoration and flooring.

brown

800,000

30 min

Water

≥1.5

65

Product

Name

Characteristics and Application

Color

viscosity

cps

Solid content

CA688

It isdevelopedfor bonding of PVCflooring. It is suitable for PVC rolls and PVC blocks,   including homogeneous and permeablePVCflooring, anti-slip flooring and sound insulation   flooring with foam lining, especially for thick flooring.

Light yellow

15,000~

25,000

70%

CA588

It isdevelopedfor bonding of PVC flooring materials. It is suitable   for bonding of PVC rolls for flooring, especially for thick flooring.

Light yellow viscous fluid

15,000~

38,000

≥71%

CA888

A one-component adhesive for   rubber floor, PVC rolls, walls, stairs, and other plastics floors.

Light yellow viscous fluid

50,000

70%

CA810

A polymer emulsion designed for PVC flooring. It has good construction   operability and bonding performance, strong initial adhesion, long application   time. It can be applied on various absorbent or non absorbent substrates,   with stable performance.

Milky white

5,000~

10,000

≥52%

CA510E

A polymer emulsion specially designed for PVC flooring. It has good   bonding strength and pressure sensitivity, especially outstanding initial   adhesion. It has good resistance to water, solvent and low temperature, ease   to use, and stable performance.

Milky white with blue light

25,000~

35,000

≥53%


Product

Name

Characteristics and Application

Color

Viscositys

Solid content

Gloss

Wear-resistance

CA310

CA310 is a water-based spraying varnish. It is mainly used for surface varnish   finish and protection of paper, wood, etc. It has fast curing rate, good   transparency, high gloss, good waterproofing property, low odor, no irritability,   and Environmental standard. It can effectively replace solvent-based varnish   products and never cause environmental pollution and harm to human health.

Milky white liquid

15-30

40~45%

>75

100cycles

CA311

It is water-based brushing varnish. It is mainly used for surface gloss   and protection of paper, wood, etc. It has fast curing rate, good   transparency, high gloss, good waterproofing property, low odor, no irritability,   and green and Environmental standard. It can effectively replace solvent-based   varnish products and never cause environmental pollution and harm to human   health.

Milky white liquid

20~50

35-40%

>60

>100cycles

CA302

CA302 is an infrared radiation cured water-based varnish with high gloss   and wear-resistance. It is mainly used for varnish finish of paper and   printed products to increase the surface gloss of printed products, wear   resistance and surface smoothness and protect ink. It has fast curing rate,   high production efficiency, low odor, no irritability, and never causes   environmental pollution. Its coating is very glossy, resistant to wear, flat,   smooth, resistant to yellowing, fast finished,firm, uniform, foldable, etc.

Milky white liquid

35-45

41-45%

60~70

>100cycles


Product

Name

Characteristics and Application

Color

Viscosity,

cps

Solid

content

Weight

ratio

Preliminary

curing

EP980

A two component epoxy adhesive which can   quickly cure in five minute quick dryings. Due to its characteristics, such   as simple preparation, high bonding strength, good impact resistance, and   good low-temperature curing properties, it is widely used for strong bonding   of metals, glass, ceramics, stone, hard plastics, FRP, wood, etc., especially   DIY products.

Milky white

A:20,000~50,000

B:10,000~40,000

100%

A:B=1:1

5 minutes

EP460

It is   suitable for low stress and general industrial applications at high impact   strength and high peel strength. It can be widely used for aluminum, steel,   and other metals, as well as various plastics and ceramics.

Light amber

20,000~30,000 after mixing

100%

A:B=2:1

60   minutes

EP120

A   two-component transparentpouring   sealant which cures at room temperature. Due to its high transparency,resistance to yellowing, and good   defoaming performance, it is suitable for transparent pouring andhandicraft production.

Colorless transparent

A:1,000~3,000

B:5-100

100%

A:B=3:1

/

Product Name

Characteristics and Application

Color

Viscosity, cps

Solid content

Peeling strength

GA150

It   can bond metal, rubber, wood, leather, etc. It has high solid content, strong   adhesion to the substrate in the early and late stages. It has excellent heat   resistance and thus is suitable use at high temperature. It is easily coated   by brush androller.

Light yellow viscous fluid

3,000~7,000

≥28%

Temperature resistance ≥ 120

Product Name

Characteristics and Application

Color

Viscosity, cps

Surface junction

Skin time

Curing condition

Hardness,

Shore D

MS405

A one-component neutral modified   silicone. It can be cured by its reactionwithwater in air.It has excellent performance and can bond most materials without any   primer. It has excellent resistance to weather, UV,heatand cold, and excellent adhesiontovarious building materials. Anenvironmentally acceptable adhesivewith very low VOC.

White

Pasty

30 min

Water

40


Product

Name

Characteristics and Application

Color

Viscosity,

cps

Solid

content

Weight

ratio

EP195

A two-component epoxy adhesive which   cures at room temperature or high temperature. Due to its characteristics,   such as simple preparation, high bonding strength, good heat resistance, corrosion   resistance, and impact resistance, it is widely used for metals, glass,   ceramics, stone, hard plastics, FRP, wood, and other materials with high   temperature resistance.

A: Black viscous fluid

B: Yellow viscous fluid

A:1,000,000~2,000,000

B:500,000~1500,000

100%

A:B=2:1